Username:

Password:

Altair AstroDIO DehumidifiersAtik CamerasModern AstronomyDavid HindsNe3 Filters

Author Topic: Tutorials for Registax 6 - general and batch processing  (Read 1809 times)

0 Members and 1 Guest are viewing this topic.

Offline TONYUK

  • Full Member
  • ***
  • Posts: 294
Tutorials for Registax 6 - general and batch processing
« on: 16:21:18, 10 October, 2014 »
I have recently looked into running batches of files under Registax 6, AVIstack and Autostakkert2.  To this end I looked for tutorials and the first I found was for Registax 6. 

For general use of Registax 6 look at

http://www.astronomie.be/registax/previewv6paul.html

For use of the batch facility look at the two following links.

http://www.astronomie.be/registax/previewbatch.html

http://www.astronomie.be/registax/previewbatch1.html

I hope these are of use to some of you though, no doubt, these links have been posted before.

Tony
TONYUK

Skywatcher 250DPS Newtonian on an NEQ6 PRO mount with an Opticstar DS336C XL 3.3 MP camera plus a Coronado PST solar telescope

Offline Nomis Elfactem

  • Administrator
  • Galactic Poster
  • *****
  • Posts: 13004
    • The View From A Room
Re: Tutorials for Registax 6 - general and batch processing
« Reply #1 on: 12:18:09, 12 October, 2014 »
Good find Tony - I've set it to sticky !
Simon

Scopes: Astro-Tech AT-111EDT Triplet, TS65ED Quad, Orion ST80, Modded PST-90 Solar Scope, PST Cak (on loan)
Cameras: SXVF H694, Atik 16ic, Canon EOS 600d, DMK41, DMK21, QHY 5L-II (mono & colour)
Accessories: SX USB Filter Wheel, SX OAG, Baader LRGB Ha SI OII Filters, SharpSky Focuser
Mount: EQ6 (EQMOD), SW Star Adventurer, plus a lot (and I mean a lot) of other bits and pieces

 

ukbuysellRemote Imaging from AustraliaSharpSkyblank APTUKAI on Facebook
Powered by SMF 2.0.15 | SMF © 2006, Simple Machines LLC
DarkBreak by DzinerStudio. Theme modified by The UKAI Team

Page created in 0.199 seconds with 36 queries.
TinyPortal © 2005-2012