Username:

Password:

UKAI is moving to Facebook

Author Topic: Inova PLB C2 and Maxim DL  (Read 1122 times)

0 Members and 1 Guest are viewing this topic.

Offline Anne S

  • Starting Member
  • **
  • Posts: 65
Inova PLB C2 and Maxim DL
« on: 20:28:50, 10 October, 2015 »
I've recently bought the above camera both for guiding and planetary/solar imaging. I'm trying to get it to work as a guider in Maxim DL but Maxim keeps coming up with an error, -4, link failure. I have Ascom 6.1 installed and the most recent driver from the manufacturer's web site. It works in PHD, both 1 and 2 and I've tested it out in AstroArt4 with their Ascom driver.

I select Ascom in Maxim and the camera chooser comes up but after that I get the window allowing me to set gain but no binning option. When I try to image with the camera that's when I get the error message.

Do I need to update the Ascom version in Maxim separately as the camera will only work with Ascom 6? The version in the Maxim  folder is the one that came when Maxim was installed years ago.

Altair Wave 102, EQ6
Altair Starwave EDT70mm, Ioptron IEQ30pro
SX H694, Superstar guider
Atik 320e colour
Altair Hypercam 178M, Altair Gpcam
Altair Astro Ritchey Chretien 6 inch

Offline Anne S

  • Starting Member
  • **
  • Posts: 65
Re: Inova PLB C2 and Maxim DL
« Reply #1 on: 21:42:38, 06 October, 2016 »
Re the issue I had above, there is a new Ascom driver for the INova PLBC2 camera as of a couple of weeks ago. I tried it out with Maxim dl and the camera connected.

Hopefully the driver issue is now fixed.
Altair Wave 102, EQ6
Altair Starwave EDT70mm, Ioptron IEQ30pro
SX H694, Superstar guider
Atik 320e colour
Altair Hypercam 178M, Altair Gpcam
Altair Astro Ritchey Chretien 6 inch

 

ukbuysellRemote Imaging from AustraliaSharpSkyblank APTUKAI on Facebook
Powered by SMF 2.0.15 | SMF © 2006, Simple Machines LLC
DarkBreak by DzinerStudio. Theme modified by The UKAI Team

Page created in 0.174 seconds with 36 queries.
TinyPortal © 2005-2012