Username:

Password:

Altair AstroDIO DehumidifiersAtik CamerasModern AstronomyDavid HindsNe3 Filters

Author Topic: EQMOD problem  (Read 530 times)

0 Members and 1 Guest are viewing this topic.

Offline Darth_Muppet

  • Full Member
  • ***
  • Posts: 374
  • Take a walk on The Dark Side......
EQMOD problem
« on: 20:47:03, 08 December, 2015 »
Since I updated to the latest EQMOD I'm getting a problem. When I run up Maxim it connects to EQMOD and runs up fine. Whenever I try and connect another piece of software like cartes Du Ciel, PHD 2 or whatever, it tries to load up another instance of EQMOD again.

Of course, there is already an EQMOD running so the new one fals with a connection error message and I cant use any other software. Prior to the update (v128) I could connect multiple items all using the same instance of EQMOD.

Any ideas?
If the world was an orange....it'd be too small!

NEQ6 Pro Syscan
Altair Astro ED 102mm Triplet & Planostar 0.79x Reducer
Altair Plamostar 80mm Triplet & Atik Titan
WO 72mm Megrez APO
Altair Colour GP Cam GP224C
TruTek Slim 8 position filter wheel
ATIK 314L Mono

Offline Darth_Muppet

  • Full Member
  • ***
  • Posts: 374
  • Take a walk on The Dark Side......
Re: EQMOD problem
« Reply #1 on: 22:43:05, 08 December, 2015 »
Spooky - reloaded the EQMOD, and ASCOM Platform and it seems to have sorted itself now. Thanks for the advice anyway
If the world was an orange....it'd be too small!

NEQ6 Pro Syscan
Altair Astro ED 102mm Triplet & Planostar 0.79x Reducer
Altair Plamostar 80mm Triplet & Atik Titan
WO 72mm Megrez APO
Altair Colour GP Cam GP224C
TruTek Slim 8 position filter wheel
ATIK 314L Mono

 

ukbuysellRemote Imaging from AustraliaSharpSkyblank APTUKAI on Facebook
Powered by SMF 2.0.13 | SMF © 2006, Simple Machines LLC
DarkBreak by DzinerStudio. Theme modified by The UKAI Team

Page created in 0.126 seconds with 36 queries.
TinyPortal © 2005-2012