Username:

Password:

UKAI is moving to Facebook

Author Topic: Error 339 MSFLXGRD.OCX  (Read 433 times)

0 Members and 1 Guest are viewing this topic.

Offline Nimbus

  • Poster God
  • *****
  • Posts: 1940
Error 339 MSFLXGRD.OCX
« on: 13:14:06, 21 March, 2017 »
Hello All,

I have recently purchased a Atik 16200 camera which my old XP laptop cannot operate and hence I have had to switch to using my "non observatory" laptop which has a high spec and was Windows 7 but is now Windows 10.  I had occasionally used this laptop without problems in the observatory.

Although has the programs I wanted to use last night appeared to work ie Maxim DL 6.13 and CdC, Focusmax/Robofocus kept throwing up error windows.  In the main error 339 MSFLXGRD.OCX, I have done quite a lot of research on the internet , reloaded the Robofocus software check ASCOM etc are all up to date with no success.  I have no idea where to go next other than 3rd party sites offering downloads that will fix things in 2 minutes all of which worry me.

All the hardware worked fine with my XP laptop.

Has anyone else had this type of problem and how did you fix it if so?

Many thank in anticipation, ATB Jim

EQ8 Pro
TAK FSQ 106 EDX IV
ATIK 16200 Mono, Atik OAG, Atik EFW3 2" LRGB S2 8.0nm /Ha 3.5nm/O3 8.5nm, Baader Filters, Lodestar Guider, Focusmax4, Robofocus
Maxim DL6.13, CdC & Photoshop CS3E,

Offline Einari

  • Poster God
  • *****
  • Posts: 2970
    • Einari's astro pages
Re: Error 339 MSFLXGRD.OCX
« Reply #1 on: 13:36:36, 21 March, 2017 »
Is it like this ?
https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/run-time-error-339-component-msflxgrdocx-is-not/50615498-cddd-4153-8477-5fa2f7d81000
Have you tried registering the dll, Run as administor as suggested ?
Also a good idea could be setup/reinstall your software/drivers as a administrator.
Tapio

Celestron C8, C9.25" & Hyperstar, iOptron CEM60-EC, TS 80 triplet,  Coronado PST, SXV-694,  ASI120MM/ASI174MC Cool

Offline Nimbus

  • Poster God
  • *****
  • Posts: 1940
Re: Error 339 MSFLXGRD.OCX
« Reply #2 on: 13:39:42, 21 March, 2017 »
Thanks Tapio, yes I have tried that, the response is that the module failed to load.

ATB Jim
EQ8 Pro
TAK FSQ 106 EDX IV
ATIK 16200 Mono, Atik OAG, Atik EFW3 2" LRGB S2 8.0nm /Ha 3.5nm/O3 8.5nm, Baader Filters, Lodestar Guider, Focusmax4, Robofocus
Maxim DL6.13, CdC & Photoshop CS3E,

 

ukbuysellRemote Imaging from AustraliaSharpSkyblank APTUKAI on Facebook
Powered by SMF 2.0.15 | SMF © 2006, Simple Machines LLC
DarkBreak by DzinerStudio. Theme modified by The UKAI Team

Page created in 0.136 seconds with 37 queries.
TinyPortal © 2005-2012