UKAI is moving to Facebook

Author Topic: Flat analysis  (Read 552 times)

0 Members and 1 Guest are viewing this topic.

Online chris.bailey

  • Administrator
  • Galactic Poster
  • *****
  • Posts: 10012
  • If at last you do succeed, don't try again
    • Rosemount Observatory
Re: Flat analysis
« Reply #15 on: 12:43:04, 10 November, 2017 »

To my eye and based on the .jpg that is about as good as it gets. Bit of residual gradient but thats not a calibration issue. Running DBE on it sort that out nicely.

To be quite honest I only use flats now if I have an issue. I try and clean the CCD optical window carefully and avoid dust motes. I then do everything else with DBE. That is with Ha though were I struggle to get flats to work well enough, a known issue with narrowbandpass.

LX200|ZS70|FSQ85|FLT110|Altair DF250RC|EQ6 Pro(Rowan Belt Mod)|ParamountMX
ATIK383L+/EFW2/OAG|Lodestar|Baader 36mm LRGBHaSIIOIII
Starlight Express SXVRH16/ONAG/FW|Lodestar X2|Baader 2" Filters
Starlight Express SXVRH814/ONAG/FW|LodestarX2|Baader 2" Filters
Lunt LS60PTBF1200|DMK41|Quark Chromo
Samyang 135mm f1.8


ukbuysellRemote Imaging from AustraliaSharpSkyblank APTUKAI on Facebook
Powered by SMF 2.0.15 | SMF © 2006, Simple Machines LLC
DarkBreak by DzinerStudio. Theme modified by The UKAI Team

Page created in 0.117 seconds with 34 queries.
TinyPortal © 2005-2012